Extron electronics SSP 200 - Roles and Permissions

SSP 200 • Internal Web Page 85
RS-232
This panel displays RS-232 information (see figure63,
6
, on page81). This panel is not
user-configurable.
Roles and Permissions
The Roles and Permissions panel on the main web page gives the user access to set
the admin and user passwords for the SSP200 (see figure63,
7
).
To change them, click EDIT in this panel. The Roles and Permission Settings dialog
box opens (see figure68).
Figure 68. Role and Permission Settings
Change each password field as applicable. Click SAVE (
1
) to apply the changes or CANCEL
(
2
) to exit the process without making any changes.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive. if the SSP200 is
reset, the passwords revert to the default, which is extron.
The maximum length of a password is 128 characters. All human-readable characters are
permitted except “|”. Passwords are case-sensitive and cannot be a single space.
NOTES:
• Only an administrator can set the admin password.
• The default admin name is admin and the default user name is user.
• An indicator of the current login status is shown on the top right corner of the
main screen.
68