Extron electronics SSP 200 - Device Menu; Reset Device

SSP200 • Product Configuration Software 57
Device Menu
The Device menu (see the imageon the right) allows the user to:
1
Disconnect the device from PCS.
2
Open the Hardware Settings or
Communication Settings.
3
Reset Device to factory default.
4
Update Firmware.
5
View the SSP-200 Help file.
6
View information About this Module.
Reset Device
This function resets all device settings to factory defaults with or without retaining the TCP/
IP settings.
To reset the device:
1. From the drop‑down Device list, select Reset Device....A dialog box opens (see
figure52).
2. Select from the three reset options shown in the figure.
3. Click Reset to perform the reset or Close to cancel the operation.
Figure 52. Reset Device
52