Extron electronics SSP 200 - Page 60

SSP200 • Product Configuration Software 52
Front Panel Lockout (Executive Mode)
This setting determines what functionality is available on the front of the device.
• Unlock Front Panel — Allows all of the buttons to operate normally.
• Mode 1 — Removes the functionality of every button on the front of the device.
• Mode 2 — Limits front panel functionality to just volume control.
• Mode 3 — Limits front panel functionality to just input selection.
Hardware Settings
Click the Hardware Settings button (see figure46 on page50) to access the Unit
Information, Device Name, Date and Time, and Password panels.
Unit Information
The Unit Information panel gives a non‑configurable view of information about the
connected device (see figure47 on the next page).
The following device information is displayed:
• Part number
• Model name
• Model description
• Firmware version
• Temperature (inside device)
• Device name
• DHCP status
• IP address
• Subnet mask
• Default gateway address
• DNS server
• MAC address
Click Edit Communication Settings (
1
) to go to the Communication Settings
panel. Click Cancel (
2
) to return to the General Settings panel.