p
StationaryBalancing Machines
Edition dated: 29.03.1994 AEI:00 EW_MT.DOC
Customer: No. Instructor:
Sold by:
Street:
Postcode/Town: Order issued by:
Tel.:
(please check as applicable)
Machine:
Serial number:
1. Check on completeness of balancing machine and freedom from damage
No defects/complaints
Missing parts:_______________________________________________________________________________
Damage in transit:___________________________________________________________________________
2. Check function of machine
Clean machine shaft, examine clamping flange
Mechanical and electrical functions checked
3. Instruction on handling and operating the balancing machine
Mechanical construction of balancing machine explained
Safety instructions
Operation with Action Center
Various clamping methods and flanges indicated
Various imbalance compensation methods explained
Concealed balance weights
. System adjustments
4. Instruction on special functions of balancing machine
Operator familiarised with match program
Flange calibration explained
Visual inspection procedure
60-gram calibration explained
5. Instruction on operating errors
Special attention drawn to possible wheel clamping errors
Reference to fault code table in operating instructions
6. Notes:_____________________________________________________________________________
____________________________________________________________________________________________
Customer’s signature:________________________________________ Time in flat rate units _____________________
Name in block letters:________________________________________ Date:________________________________
X
To Next Page
Loading...
