Facom BEISSBARTH microtec 880 - Flange Calibration; Calibration with Weight

BEISSBARTH MT 870 / MT 880
9-2
Activate the “Calibration with weight”
screen button by pressing the Action
Center.
The screen page for calibrating with weight will
appear.
To ensure accurate calibration, always comply
exactly
with the screen instructions for the
calibration program.
Calibration with weight
Activate the “Flange calibration” scre-
en button by pressing the Action
Center.
The flange calibration screen page will appear.
To ensure reliable calibration, always comply
exactly
with the screen instructions for the
calibration program..
Flange calibration