32
Hanged wheel castor
Hanged wheel castor
"F3" "
Rim runout compensation
"
"F5" "
wheel alignment
"
"F6" "
Camber
"
"F7" "
Camber and castor
"
"F8" "
Read adjustment points
"
"F9" "
Return to inspection results
".
Press F3
11.11 Hanged wheel castor
Note:
The hanged wheel camber procedure is performed by lifting the
vehicle but without removing the wheels from the deck.
- Confirm by pressing F7.
- Follow the instructions on the screen.
- Validate each stage.
- Confirm by pressing F2.
- You will then see the next screen.
Hanged wheel castor
Rim runout compensation after castor
- Follow the instructions on the screen.
- Perform rim runout compensation on the adjusted wheel.
- Press F8 to return to the castor/pivot/alignment read-out
screen.
Rim runout compensation after castor
To Next Page