5
2 - Characteristics
- Model GTR.600RW/600CW.
- Architecture 1 measurement unit with video interface.
4 measurement heads with 4 sensors.
Cable or radio data transmission.
- Technology Measurement of angles using infrared.
- Supply 230 V - 50 Hz / 60 Hz unit. CEI three-phase connector.
- Temperature Normal service in the range 0°C - 40°C.
- Relative humidity Maximum 90% at 40°C.
- Supply fluctuation ± 10%
- Transient voltage peaks Category II
- Maximum consumption 300W
- Electronic compensation for wheel rim runout:
- Measurement capacity: *
* General specifications as per standard TAV.NFR 63 - 301.
3 - Description of equipment
The GTR.600RW and GTR.600CW wheel assembly geometry inspection systems feature the following:
Wide-field infrared geometry measurement link (continuous signal read over 40°).
Rapid-access databases (manufacturers’ codes and makes).
Automatic computation of angles according to indicated body height (height entered by user).
Enhanced productivity (measurement commences as soon as the heads are in place).
Data transmission and head power supply via cable link.
Axle cabling for head connection (option).
System components: Main unit IBM** PC type or equivalent
Colour screen Standard (640 x 200 x 16 colours)
Multimedia (800 x 600 x 256 colours)
(14", "17" or "19").
4 measuring heads each fitted with four sensors.
Rim runout compensation button on each head.
Electronic levelling on each head.
** Registered trademark.
To Next Page