Facom GTR.600W - Installation and Commissioning; System Connections (Cables Version)

6
4 - Installation and commissioning
· Assemble and cable up system as per unit diagram.
· Connect the system to the mains supply (230 V - 50 Hz / 60 Hz).
· Connect the printer.
· Check that a battery (9V - 6R22) is present in the remote control.
5 - System connections (cables version)
Screen
Keyboard
Main unit
Main supply
Printer
Main unit and housing
Remote control
Rear LH head
Rear RH head
Front LH head
Front RH head
Main unit - head link: 9-metre cable ref. UB.63.
Head to head link: 4.5-metre cable ref. UB.64.