Installation manual
CNC 8035
MACHINE PARAMETERS
Axis parameters
4.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·125·
DECINPUT (P31)
Indicates whether or not this axis has a home switch for machine reference search.
REFPULSE (P32)
It indicates the type of flank of the I0 signal that is used for home search.
REFDIREC (P33)
Indicates the direction of the home search in this axis.
REFEED1 (P34)
Indicates the axis feedrate when searching home until it hits the home switch.
REFEED2 (P35)
Indicates the axis feedrate when searching home after hitting the home switch until it finds the marker
pulse (Io).
REFVALUE (P36)
Indicates the position value of the machine reference point (physical location of the marker pulse)
with respect to machine reference zero.
The machine reference point is a point that the OEM sets on the machine to synchronize the system.
The CNC positions the axis at this point, instead of moving it to the machine zero point.
Value Meaning
NO It has no home switch.
YES It has a home switch.
Default value: YES
Value Meaning
+ sign Positive flank (leading edge); change from 0V to 5V.
- sign Negative flank (trailing edge); change from 5V to 0V.
Default value: + sign
Value Meaning
+ sign Positive direction.
- sign Negative direction.
Default value: + sign
Possible values
Between 0.0001 and 199999.9999 degrees/min or mm/min.
Between 0.00001 and 7874.01574 inches/min.
Default value: 1000 mm/min.
Possible values
Between 0.0001 and 99999.9999 degrees/min or mm/min.
Between 0.00001 inches/min and 3937.00787 inches/min.
Default value: 100 mm/min.
Possible values
Within ±99999.9999 degrees or millimeters.
Within ±3937.00787 inches.
Default value: 0
To Next Page
Loading...
