Basketball
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 33
UPDATING SCORE/TRACKING PLAYER POINTS (MP-70 ONLY)
When you are using the points memory option (see POINTS MEMORY (MP-70
ONLY) on page 26), the process of updating the score is slightly different from the
steps in UPDATING THE SCORE on page 15. Update the score as follows:
1. Press HOME SCORE or VISITOR SCORE .
2. Press +1 , +2 or +3 to increase the score
by the increment indicated. The prompt
ENTER PLY # appears on the LCD display.
3. On the numeric keypad, type the number of the scoring player and then
press ENTER .
After you enter the player number, the player’s statistics appear in the player
fouls region of the scoreboard (on some models, this region of the scoreboard
also displays player points). The player statistics blank automatically after 15
seconds but remain in memory. On scoreboards equipped with statistics panels,
the player’s statistics will flash 10 times on the appropriate panel.
TRACKING FOULS (MP-70 ONLY)
Follow these steps to update team and player fouls.
1. Press HOME FOULS or VISITOR FOULS .
2. Press +1 . The team fouls count increases by
one.
3. If the foul memory feature is active, the prompt
ENTER PLY # appears on the LCD display.
4. On the numeric keypad, type the player number and then
press ENTER . The player’s statistics appear for fifteen seconds in the
player fouls region of the scoreboard and flash 10 times on statistics
panels if the scoreboard is so equipped.
If you need to correct the team fouls value, follow these steps:
1. Press HOME FOULS or VISITOR FOULS .
2. On the numeric keypad, enter the total number of fouls and then
press ENTER .
Note: When you use the +1 key to update team fouls, the number of team
fouls stops increasing when it reaches the maximum number of team fouls
allowed. This is the value you have specified at the MAX.T.FOULS prompt
in the sport-specific settings for basketball on MAXIMUM TEAM FOULS ON
PAGE 24.
BB 10.0 20:00.
ENTER PLY. #
BB 10.0 20:00.
H.TEAM FOULS 1
BB 10.0 20:00.
ENTER PLY. #