Baseball
76 MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
1. Press HOME RUNS TOTAL or
VISITOR RUNS TOTAL .
2. Press one of the following keys to adjust the hit
count by the increment indicated +1 , +2 , +3 or -1 or
On the numeric keypad, enter the new number of runs and then
press ENTER .
TRACKING ERRORS
Press ERROR to turn the error indicator on or off.
With some scoreboard types, the prompt appears when
you turn the error indicator on. Enter the position
number of the player committing the error; then
press ENTER .
If your scoreboard type allows you tally errors for each team follow these steps:
1. Press HOME ERRORS or VISITOR ERRORS .
2. Press one of the following keys to adjust the
error count by the increment indicated +1 ,
+2 , +3 or -1 or on the numeric keypad,
enter the new error count and then
press ENTER .
READING BASEBALL SCOREBOARD CLOCKS
On baseball scoreboards there are two types of clock available.
1. Standard four-digit clock is programmable for display of either
minutes/seconds or hours/minutes. Cadence of seconds or minutes
indicates which mode this clock is in.
2. Two-digit “jump” clock with colons on either sides of digits.
Right-colon lit: Minutes are displayed
Left-colon lit: Seconds are displayed
In HOUR CLOCK mode only:
Both colons lit: Hours are displayed until last hour when right colon is lit
to indicate minutes.
Note: Some two-digit models are capable of displaying the inning number on the
clock. If this feature is activated, neither colon will be lit while the inning
number is displayed.
BA 0:00.00
POSITION NO. ?
To Next Page
Loading...
