Football
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 39
NUMBER OF TIMEOUTS LEFT
Enter the number of timeouts allowed, either per game
or per half. When you press SHIFT + NEW GAME ,
this value resets automatically. If you are tracking
timeouts by half, you must manually reset the number of timeouts left at halftime.
VIDEO CHARACTER GENERATOR
Enter YES to enable data out on the RS-232
connector for use with the VideoStamp+ character
generator. Responding NO will default to ProLine
data on the RS-232 connector for most sports.
OPERATING THE CONTROL IN A FOOTBALL GAME
Before continuing with this chapter, be sure the letters FB appear in the upper-
left corner of the LCD display. This indicates that football is the sport currently
selected. If you see a different code, select football as instructed at SELECTING
AND CHANGING SPORTS on page 151. You may want to adjust the sport-specific
settings for football as instructed earlier in this chapter.
See COMMON FUNCTIONS on page 13 for a discussion of several functions of the
MP-70/50 that are important to its operation in a football game, such as operating
the clock and updating the score.
OPERATING THE POSSESSION LIGHTS
Press POSS. to alternate between the home and
guest possession lights. To turn both lights off,
press POSS. ; then press SHIFT + BLANK .
- CHANGE SPORT -
# OF TOLS,1TO9?
FB 25 9:08.
POSSESSION- HOME
- CHANGE SPORT -
VIDEO CHAR? Y/N
To Next Page
Loading...