Hockey
44 MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
TIMEOUT TIMER SET TO
On the numeric keypad, enter the number of seconds
per timeout and then press ENTER .
NUMBER OF TIMEOUTS LEFT
Enter the number of timeouts allowed, either per game
or per half. When you press SHIFT + NEW GAME ,
this value resets automatically. If you are tracking timeouts by half, you must
manually reset the number of timeouts left at half time.
GOAL LIGHTS
Enter YES if you want the goal lights operated from
outputs 3 & 4. If NO , outputs 3 & 4 defaults to the usual timer data output.
VIDEO CHARACTER GENERATOR
Enter YES to enable data out on the RS-232
connector for use with the VideoStamp+ character generator.
Responding NO will default to ProLine data on the RS-232 connector for most
sports.
OPERATING THE CONTROL IN A HOCKEY GAME
Before continuing with this chapter, be sure the letters HK appear in the upper-
left corner of the LCD display. This indicates that hockey is the sport currently
selected. If you see a different code, select hockey as instructed at SELECTING
AND CHANGING SPORTS on page 151. You may want to adjust the sport-specific
settings for hockey as instructed earlier in this chapter.
You should also be familiar with the information in the chapter titled COMMON
FUNCTIONS on page 13 before continuing with this chapter. This chapter
discusses several functions of the MP-70/50 that are important to its operation in
a hockey game, such as operating the clock and updating the score.
DISPLAYING SHOTS ON GOAL
The HOME S.O.G. or VISITOR S.O.G. keys work much like the SCORE keys.
Follow these steps to use them.
1. Press HOME S.O.G. or VISITOR S.O.G.
2. Press one of the following keys to adjust the
shots on goal value by the increment
indicated: +1 , +2 , +3 or -1 .
- CHANGE SPORT -
# OF TOLS,1TO9?
- CHANGE SPORT -
T.O.TIMER TO? 00
HK 30 10:02.
H. S.O.GOAL 4
- CHANGE SPORT -
GL @ CONN3&4?Y/N
- CHANGE SPORT -
VIDEO CHAR? Y/N
To Next Page
Loading...