Lacrosse
80 MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
Or
1. Press HOME S.O.G. or VISITOR S.O.G. .
2. On the numeric keypad, enter the new shots on goal value and then
press ENTER .
PENALTIES
Follow these steps to start a penalty timer:
1. Press HOME PENALTY or VISITOR PENALTY .
2. Press +1 , +2 or +3 to assign a penalty
time. These keys will assign penalties according
to the following pre-set times:
+1 = 30 seconds.
+2 = 1 minute.
+3 = 2 minutes.
-1 = 3 minutes.
If a player receives two back-to-back penalties, you can press another of
the + keys to add more time.
3. At the ENTER PLY. NO. prompt, enter the player number on the numeric
keypad and then press ENTER .
In lacrosse, there are three penalty clocks per team, and the MP-70/50 can store
up to five penalties per team in memory. This means only the first three penalties
in memory for each team will count down. When there are four or more penalties
in memory at once, the fourth penalty begins to count down when one of the first
three expires.
Penalty timers count down only when the game clock is running during a regular
game period; they do not count down during break periods.
If you correct the game clock during a game period
when penalty timers are running, the prompt below
appears. Press SHIFT + YES if you want to correct
the penalties that are actually counting.
Note: The MP-70/50 can track a maximum of six counting penalties (three
counting penalties for each team), at any given time. However, you will
only be presented with the penalties that are currently being counted.
LC 5:54.45
CORR.PENALTY?Y/N
To Next Page
Loading...
