Need help?Do you have a question about the Fairplay MP-70 and is the answer not in the manual?
Describes the six Trans-Lux/Fair-Play scoreboard controls and their features.
Outlines the chapters and content covered in the user guide.
Provides information on contacting the help desk and ordering parts.
Lists information needed before contacting support or service.
Lists critical safety warnings and precautions for operating the MP-70/50.
Details the importance of correctly connecting equipment to the MP-70/50.
Provides visual diagrams of the back panel connections for MP-70 and MP-50.
Lists and describes optional hand switches available for the MP-70.
Explains how to enable or disable the MiClock™ remote switch feature.
Explains how to operate the clock using the TIME IN switch and controls.
Details the function of the TIME IN switch for starting and stopping the clock.
Describes how to use the CLOCK SET key to set game, break, and overtime periods.
Provides steps for entering or updating the score on the scoreboard.
Explains how to enter or update the period number.
Details how to sound the horn manually or set it to AUTO HORN mode.
Explains how to operate the shot/field timer using a hand switch for the MP-70.
Guides through sport-specific setting options for basketball.
Describes the AUTO PERIOD ADVANCE feature for automatic period and break times.
Configures whether the clock counts down or counts up.
Configures the display of tenths of seconds in the last minute of play.
Configures the automatic horn feature for basketball.
Sets the duration of the break period (half time) in minutes.
Sets the duration of the overtime period in minutes.
Specifies the number of team fouls needed for a bonus situation.
Sets the maximum number of team fouls to display.
Determines if the timeout timer appears on the scoreboard.
Sets the number of seconds for a primary timeout.
Configures the warning horn for the alternate 2nd timeout.
Sets the total number of timeouts allowed per game or half.
Configures the Transparent Shot Clock Timer.
Configures the display of tenths of seconds on the transparent shot clock.
Sets the duration of shot timer #1A for the MP-70.
Sets the duration of shot timer #1B for the MP-70.
Enables tracking of fouls and points by player number.
Tracks points by player number, if foul memory is active.
Allows entering player numbers for home and visiting teams.
Details features specific to FIBA basketball rules.
Explains how to alternate or blank possession lights.
Details options for controlling bonus lights (ON, DOUBLE BONUS, OFF).
Programs and stores two different default shot timer clock durations.
Sets the display color for the game clock.
Sets the display color for the shot clock.
Sets the display color for the goal light indicator.
Steps to display player statistics on scoreboards.
Removes all players from a team for mass substitution.
Updates team and player fouls, including corrections.
Guides through sport-specific setting options for football.
Exclusive setting for FB-8218TK scoreboard supporting football, soccer, track.
Configures whether the clock counts down or counts up.
Configures the display of tenths of seconds in the last minute of play.
Determines if the timeout timer appears on the scoreboard.
Sets duration for field timer clocks #1 and #2 for MP-70.
Sets the duration of the game period in minutes.
Sets the duration of the break period (half time) in minutes.
Sets the duration of the overtime period in minutes.
Sets the number of seconds per timeout.
Enables data output for video character generator.
Guides through sport-specific setting options for hockey.
Configures the interval timer for dividing game periods.
Option for 10-minute penalties on indicator lights (European rules).
Configures whether the clock counts down or counts up.
Configures the automatic horn feature for hockey.
Sets duration (seconds) of field timer for MP-70.
Determines if the timeout timer appears on the scoreboard.
Sets the duration of the game period in minutes.
Sets the duration of the break period (half time) in minutes.
Sets the duration of the overtime period in minutes.
Sets the total number of timeouts allowed per game or half.
Configures goal lights operation from outputs 3 & 4.
Enables data output for video character generator.
Guides on operating the control during a hockey game.
Explains how to display shots on goal values.
Details how to enter penalty times for players.
Steps to enter a penalty time for a single player.
Enters penalties using the 'OTHER' key for specific combinations.
Clears or edits existing penalty entries.
Guides through sport-specific setting options for volleyball.
Configures the display of tenths of seconds in the last minute of play.
Configures the automatic horn feature for volleyball.
Determines if the timeout timer appears on the scoreboard.
Sets the duration of the game period in minutes.
Sets the duration of the break period (half time) in minutes.
Sets the duration of the overtime period in minutes.
Sets the number of seconds per timeout.
Sets the total number of timeouts allowed per game or half.
Guides on operating the control during a volleyball game.
Alternates or blanks home and guest service indicators.
Enters or updates the number of games won.
Enters or updates the game number.
Guides through sport-specific setting options for track.
Option to use PowerTime handheld multi-functional timer.
Guides on operating the control in manual mode for track.
Enters or updates the event number.
Enters lane and place information for contestants.
Guides on how to display event results.
Guides through sport-specific setting options for baseball.
Automatically increases total runs when score by inning increases.
Configures whether the clock counts down or counts up.
Configures the automatic horn feature for baseball.
Allows use of pitch timer and between innings timer.
Sets duration of Field Timer clocks 1 and 2 for MP-70.
Enables pitch speed display using specific sensors.
Updates the inning number.
Toggles between displaying innings and game clock.
Tracks score by inning for specific scoreboard models.
Explains the 1 PRESS BSO feature for ball, strike, and out values.
Tracks the number of pitches by home or visitor pitcher.
Clears the pitch count when there is a pitcher change.
Clears ball, strike, and at bat fields simultaneously.
Turns the hit indicator on/off and updates hit counts.
Updates run counts for each team.
Explains how to interpret standard and jump clocks on baseball scoreboards.
Guides through sport-specific setting options for lacrosse.
Configures the display of tenths of seconds in the last minute of play.
Configures the automatic horn feature for lacrosse.
Determines if the timeout timer appears on the scoreboard.
Sets duration (seconds) of field timer for MP-70.
Sets the duration of the game period in minutes.
Sets the duration of the break period (half time) in minutes.
Sets the number of seconds per timeout.
Sets the total number of timeouts allowed per game or half.
Guides on operating the control during a lacrosse game.
Alternates between home and visitor possession lights.
Explains how to display shots on goal values.
Corrects or cancels an individual player penalty.
Explains how to adjust shots on goal values.
Transmits team name data to electronic displays via wired/wireless.
Concludes team name entry and transmits data to the scoreboard.
Details setting up the wireless connection for MP-70/50.
Configures HIGH POWER or LOW POWER TRANSMISSION modes.
Displays current radio transmitter settings.
Modifies settings like HIGH POWER TRANSMIT.
Selects a channel number for SEL mode operation.
Matches control and scoreboard receiver channels in SEL mode.
Guides on finding the channel switch on the receiver card.
Confirms signal lock, indicating successful wireless connection.
Procedure to turn off wireless feature for conventional cable connection.
Describes the correct power-up order for systems with multiple wireless controls.
Explains synchronizing SEL and ALL modes for multiple scoreboards.
Addresses issues related to radio frequency interference.
Information on filter kits to resolve flickering or sluggish responses.
Guides on setting up the wireless G2 connection.
Optimal positioning of the antenna for transmission.
Specifies the required range for transmitter and receiver.
Displays radio transmitter settings for Power Modes and Transmission Mode.
Identifies the location of the receiver card in scoreboards.
Checks channel selection by observing scoreboard display.
Confirms signal lock, indicating successful wireless connection.
Instructions for connecting both wireless and wired systems.
Addresses issues related to radio frequency interference.
Details DIP switch settings for the scoreboard receiver.
Highlights key features of the G3 wireless system.
Optimal positioning of the antenna for transmission.
Emphasizes the need for clear line-of-sight for optimal transmission.
Information on factory programmed settings for scoreboard type, group, data format.
Sets the scoreboard group number for wireless communication.
Remotely sets the scoreboard type via wireless method.
Identifies the location of the receiver card in scoreboards.
Displays the software version of the scoreboard's transceiver.
Displays scoreboard type, group number, model, and firmware version.
Sets scoreboard type, which also sets the default group number.
Sets the group number for the control.
Provides tips for clear line-of-sight and group number settings.
Instructions for connecting both wireless and wired systems.
Explains Split Mode and Single Mode for controlling multiple scoreboards.
Addresses issues related to radio frequency interference.
Explains the battery level indicator LEDs.
Provides approximate battery life based on LED indicators.
Location and usage of the charging port.
Step-by-step instructions for charging the battery.
Care and safety recommendations for battery longevity.
Lists critical safety warnings and precautions for battery use.
Steps to lock the control and prevent unauthorized changes.
Lists features that are not affected by the lock mode.
Lists features that are locked by the mode.
Specifies the type of scoreboard being controlled.
Selects data format (MP-69 or MP-70) for scoreboard output.
Selects the time format for the time of day clock.
Guides through the process of adjusting system settings.
Configures the MP-70/50 for the specific scoreboard type.
Configures pitch speed and 2-digit clock for baseball board types.
Selects data format (MP-70 or MP-69) for scoreboard output.
Configures radio timer for wireless shot/field timers.
Activates team name displays if scoreboard is equipped.
Selects 12-hour or 24-hour time format for the time of day clock.
Exits SYSTEM SETTINGS or restarts the process.
Guides on changing the keypad insert for different sports.
Loads previously saved system and sport level settings.
Deletes a saved configuration from memory.
Modifies existing saved configurations.
Explains using the Segment Timer for drills and breaks.
Guides on programming segment and break times.
Explains segment numbering, increment/decrement, and timing.
Returns the control to standard scoreboard timing operations.
Steps to enter the special TEST mode for lamp circuit verification.
Procedure to exit TEST mode and return to normal operation.
Explains how TEST mode tests electronic team name areas.
Verifies power, connections, antenna, and settings when display is blank.
Verifies system settings, scoreboard type, and data format if no response.
General| Brand | Fairplay |
|---|---|
| Model | MP-70 |
| Category | Controller |
| Language | English |
To Next Page
