Baseball
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 75
1. Press HOME PITCH COUNT for a home team pitcher change or
press VISITOR PITCH COUNT for a visitor team pitcher change.
2. Press SHIFT + -1/ BLANK button. The
corresponding pitch count display will be
blanked (cleared).
INDICATING THE TEAM AND PLAYER AT BAT
Press TOP BOTTOM OF INNING to alternate
between the home team and visiting team. To blank
both indicators, press TOP BOTTOM OF INNING
and then press SHIFT + BLANK .
If you are using a multi-purpose scoreboard such as the MP-7114,
press HOME SPOT or VISITOR SPOT to control the possession indicators.
Follow these steps to display the batter’s player number if your scoreboard type
supports this option:
1. Press AT-BAT .
2. On the numeric keypad, enter the player number and then
press ENTER .
CLEARING BALL, STRIKE AND AT BAT
Press CLEAR BALL STRIKE AT BAT to clear the
ball, strike, out and at bat fields at once.
UPDATING HITS
Press HIT to turn the hit indicator on and off.
If your scoreboard type allows you to tally hits for each
team, follow these steps.
1. Press HOME HITS or VISITOR HITS .
2. Press one of the following keys to adjust the hit
count by the increment indicated: +1 , +2 , +3 or -1 or
On the numeric keypad, enter the new hit count and then
press ENTER .
UPDATING RUNS
If your scoreboard type allows you to tally runs for each team, follow these steps:
BA 0:00.00
CLR- B,S & ATBAT
To Next Page
Loading...