Introduction
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 5
CONVENTIONS USED IN THIS GUIDE
The following conventions are used throughout this manual to help you identify
actions, terms, hints, notes, and warnings.
For clarity and brevity, the control functions discussed in this guide will
be referred to as MP-70/50, MP-70 or MP-50. Only when referring to the
Wireless G2 option will the reference change to MP-72/52, MP-72 or MP-
52.
ALL CAPITALIZED non-bold large text describes either
a. Modes of your control’s functionality, such as PROGRAM mode or
TEST mode; or
b. A message or prompt displayed on the control’s LCD.
Example: In PROGRAM mode, you will see the LCD display the
message “CHANGE SPORT?”
BOXED BOLD & CAPITALIZED text – highlights buttons or switches
you must use to complete an action.
Example: Press the ENTER button to complete the action.
CROSS-REFERENCE small text – such as the blue color, all-capitalized
small text shown at left, indicates a cross-reference in another part of this
user guide.
Example: See INTRODUCTION on page 1 for the beginning of this
chapter.
Note: A note, such as this one, provides additional information. It
may also discuss other procedures to think about.
To Next Page
Loading...
