Wrestling
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 53
INJURY TIME
On the numeric keypad, enter the number of minutes
and seconds for the injury timer and then
press ENTER .
NUMBER OF TIMEOUTS LEFT
Enter the number of timeouts allowed. When you
press SHIFT + NEW GAME , this value resets
automatically.
OPERATING THE CONTROL IN A WRESTLING MATCH
Before continuing with this chapter, be sure the letters WR appear in the upper-
left corner of the LCD display. This indicates that wrestling is the sport currently
selected. If you see a different code, selected wrestling as instructed at
SELECTING AND CHANGING SPORTS on page 151. You may want to adjust the
sport-specific settings for wrestling as instructed earlier in this chapter.
You should also be familiar with the information in COMMON FUNCTIONS on page
13, which discusses several functions of the MP-70/50 that are important to its
operation in a wrestling match.
DISPLAYING MATCH WEIGHT
The match weight appears in the player fouls area of the scoreboard. Follow
these steps to display match weight:
1. Press WEIGHT GAME .
2. Enter the match weight on the numeric keypad and then press ENTER .
If you are using the BB-6620TA scoreboard, the WEIGHT GAME key lets you
alternate between the time-advantage clock and match weight on the
scoreboard.
CONTROLLING THE TIME-ADVANTAGE CLOCK
Follow these steps to set the time-advantage clock
1. Press SET TIMER .
2. Enter the time on the numeric keypad and then press ENTER .
You must use a hand switch to control the time-advantage clock.
- CHANGE SPORT -
# OF TOLS,1TO9?
- CHANGE SPORT -
INJURY TIME _:__
To Next Page
Loading...