Basketball
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 31
SETTING THE TRANSPARENT TIMER COLOR
Use this feature if your scoreboard is equipped and configured with the
Transparent Timer; which displays the game clock time, shot clock time, and goal
light indicator. To configure the Transparent Timer, please refer to page 25.
Follow instructions below to change the color.
SET GAME CLOCK COLOR
A. Press GAME SHOT GOAL COLOR button
repeatedly until GAME CLK: displays.
B. Press the +1 or -1 key to set a different
color. The following display colors are available: yellow, blue, magenta,
cyan, white, red, and green.
SET SHOT CLOCK COLOR
A. Press GAME SHOT GOAL COLOR button
repeatedly until SHOT CLK: displays.
B. Press the +1 or -1 key to set a different
color. The following display colors are available: yellow, blue, magenta,
cyan, white, red, and green.
SET GOAL LIGHT COLOR
A. Press GAME SHOT GOAL COLOR button
repeatedly until GOAL CLK: displays.
B. Press the +1 or -1 key to set a different
color. The following display colors are available: yellow, blue, magenta,
cyan, white, red, and green.
DISPLAYING PLAYER STATISTICS (MP-70 ONLY)
Follow these steps to place a player in the game and display that player’s
statistics on scoreboards equipped with five or six player (per team) statistics
panels.
Note: Beginning with version 3.04, player statistics are displayed in player
number numerical order on the statistics panels.
1. Press HOME FOULS or VISITOR FOULS .
2. Press +2 IN/OUT .
3. At the PLAYER NO prompt, type the player number and then
press ENTER . The player’s statistics will appear in the first open
position of the home or visitor statistics panel.
BB 10.0 20:00.
GAME CLK: YELLOW
BB 10.0 20:00.
SHOT CLK: YELLOW
BB 10.0 20:00.
GOAL LIT: YELLOW
To Next Page
Loading...