Basketball
30 MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
Shot timer default reset values can be set into the control’s permanent memory
either while entering sport specific settings for basketball , or when selecting the
shot timer reset value as detailed in the following instructions.
1. Press SHIFT + PERIOD/NEW GAME , then
press YES . The shot timer reset value is
selectable only when the game clock seconds =
00, home and visitor score = 0, and the game
clock is not counting. In other words, after the
control is set for a new game (see NEW GAME
on page 20) and before a new game has
started.
2. Press the SET TIMER/T.O.D. key twice and
the LCD screen will appear as shown.
Press YES to select or program a different
shot clock reset time.
3. The bottom half of the LCD screen will display
the current values for both clocks. The currently
selected reset value is highlighted with dark
brackets. In the example shown, the current
shot timer reset value is 30 seconds.
4. To keep the currently selected reset time, press
the ENTER key.
To select the other time,
press SHIFT + NEXT to highlight it then
press the ENTER key.
If you want to change either reset value, highlight the desired value with
the SHIFT + NEXT keys then use the numeric keypad to enter a
new two-digit time. Press the ENTER key to keep it as your new
default reset time.
The bottom half of the LCD screen will confirm
your selection by displaying TIMER RESET
value (in seconds). Once the game has started,
the shot timer displays will reset to the selected value whenever the HS-
70 hand switch reset button is activated.
Note: For more information on how to use the HS-70 hand switch during a
basketball game, refer to OPERATING THE SHOT/FIELD TIMER HAND
SWITCH (MP-70 only) on page 16.
BB 35 8:00
CHG.RES.TIME?Y/N
BB 35 8:00
35 <- OR ->█30█
BB 35 8:00
█35█<- OR -> 30
BB 35 8:00
TIMER RESET = 35
To Next Page
Loading...
