Selecting and Changing Sports
152 MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
To select a different sport, follow the steps described on the following pages. Be
sure your scoreboard supports the sport you want to select. In other words, don’t
try to display football information on a baseball scoreboard unless the scoreboard
is capable of doing so!
Note: When initially programming the MP-70/50, or if the display system
hardware (scoreboard type) has changed, be sure to configure the
SYSTEM SETTINGS before doing anything with the CHANGE SPORT
settings. See PROGRAMMING THE SYSTEM SETTINGS on page 142 for
details.
1. Turn off the MP-70/50.
2. Press and hold the ENTER key while turning
on the MP-70/50. The following messages
appear on the LCD display.
3. Press YES if you want to change the settings
for the sport currently displayed or
press NO to select another sport.
4. To change the sport-specific settings,
press YES at the CONTINUE prompt.
Otherwise, press NO . See the chapter
relating to each sport for information on these
sport-specific settings. The table on shown on
page 153 will help you locate the appropriate
chapter, and the questions detailed within each
chapter.
5. When you see the prompt QUIT?,
press YES if you want to accept the
new settings and exit PROGRAM
MODE
press NO to select a different sport or go through the
questions again.
- CHANGE SPORT -
BASKETBALL? Y/N
- CHANGE SPORT -
CONTINUE? Y/N
- CHANGE SPORT -
QUIT? Y/N
To Next Page
Loading...
