Volleyball
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13 63
VIDEO CHARACTER GENERATOR
Enter YES to enable data out on the RS-232
connector for use with the VideoStamp+ character
generator. Responding NO will default to ProLine
data on the RS-232 connector for most sports.
OPERATING THE CONTROL IN A VOLLEYBALL GAME
Before continuing with this chapter, be sure the letters VB appear in the upper-
left corner of the LCD display. This indicates that volleyball is the sport currently
selected. If you see a different code, select volleyball, as instructed at SELECTING
AND CHANGING SPORTS on page 151. You may want to adjust the sport-specific
settings for volleyball as instructed earlier in this chapter.
You should also be familiar with the information in the chapter titled COMMON
FUNCTIONS on page 13, which discusses several functions of the MP-70/50 that
are important to its operation in a volleyball game, such as operating the clock
and updating the score.
CONTROLLING THE SERVICE INDICATORS
Press the NEXT POSS key to alternate between the home and guest service
indicators. To blank both service indicators, press NEXT POSS . Then
press SHIFT + BLANK .
DISPLAYING GAMES WON
Follow these steps to enter or update the number of games won:
1. Press one of the GAMES WON keys (HOME FOULS or VISITOR
FOULS).
2. Press one of the following keys to adjust the number by the increment
indicated: +1 , +2 , +3 or –1 .
or
1. Press one of the GAMES WON keys (HOME FOULS or VISITOR
FOULS).
2. On the numeric keypad, enter the new number and then press ENTER .
DISPLAYING THE GAME NUMBER
Follow these steps to enter or update the game number:
1. Press WEIGHT GAME.
2. Press one of the following keys to adjust the game number by the
increment indicated: +1 , +2 , +3 or –1 .
- CHANGE SPORT -
VIDEO CHAR? Y/N
To Next Page
Loading...