Safety - RT10
11
Safety Instructions
Safety Symbols
Safety Alert Symbol
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
CAUTION
The signal word CAUTION on the machine
and in the manuals indicates a potentially
hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also
be used to alert against unsafe practices.
DANGER
The signal word DANGER on the machine and
in the manuals indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
The signal word WARNING on the machine
and in the manuals indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
IMPORTANT
This notice identifies procedures which must
be followed to avoid damage to the machine.
Qualified Operator Safety
Operators must have instructions before operating
the machine. Untrained operators can cause injury
or death.
For an operator to be qualified, he or she must
not use drugs or alcohol which impair alertness
or coordination while working. An operator who is
taking prescription drugs must get medical advice
to determine if he or she can safely operate a
machine and the equipment.
Understand the written instructions, rules and
regulations:
• The written instructions from Farm King include
the Warranty Registration, Dealer Inspection
Report, Operator And Parts Manual and machine
signs (decals).
• Check the rules and regulations at your location.
The rules may include an employer’s work
safety requirements. Regulations may apply
to local driving requirements or use of a Slow
Moving Vehicle (SMV) emblem. Regulations
may identify a hazard such as a utility line.
Have Training with Actual Operation:
• Operator training must consist of a demonstration
and verbal instruction. This training is given by
the machine owner prior to operation.
• The new operator must start in an area without
bystanders and use all the controls until he or
she can operate the machine safely under all
conditions of the work area. Always fasten seat
belt before operating.
Know the Work Conditions:
• Clear working area of all bystanders, especially
small children and all obstacles that might be
hooked or snagged, causing injury or damage.
• Know the location of any overhead or
underground power lines. Call local utilities and
have all underground power lines marked prior
to operation.
• Wear tight fitting clothing. Always wear safety
glasses when doing maintenance or service.
To Next Page
Loading...
