Maintenance - RT10
39
Troubleshooting
WARNING
Instructions are necessary before operating or servicing equipment. Read and understand the
Operator And Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions
in the manuals when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow instructions can cause
injury or death.
If a problem is encountered that is difficult to solve, even after having read through this troubleshooting
section, please call your local distributor or dealer. Before you call, please have this Operator And Parts
Manual and the serial number of your machine at hand.
PROBLEM CAUSE CORRECTION
Partial or insufficient
forage harvesting.
Tines too high off the ground. Adjust working rotary group angle.
Tines rapid wear out.
The tines are continuously in
contact with the ground
Adjust working rotary group angle.
To Next Page
Loading...
