Operation - RT10
26
Pull-Type Hitch
Move the tractor backwards, aligning the drawbar
with the tedder hitch (see the tractor’s operator’s
manual for the correct procedure).
Figure 18
Lower or raise the Tedder hitch (Item 1) until aligned
with the tractor’s drawbar [Figure 18].
Align the drawbar hitch pin hole with the tedder
hitch pin hole.
IMPORTANT
Always use a hitch pins of adequate size and
strength and a retaining pin with a locking
device.
Figure 19
Install the hitch pin (Item 1) and retaining pin to
securely fasten the tedder hitch to the tractor
drawbar [Figure 19].
Attach the safety chain (if equipped).
1
1
To Next Page
Loading...
