Farm King RT10 - Rotor Grease Locations

Maintenance - RT10
42
Figure 36
Apply two to three pumps of grease to the guard
bushings (Item 1) [Figure 36].
Apply eight to ten pumps of grease to the
telescoping member (Item 2) [Figure 36].
Grease every 20 hours.
Figure 37
Apply two to three pumps of grease to the shear
pin (Item 1) and PTO quick disconnect (Item 2)
[Figure 37].
Grease every 20 hours.
2-3 8-10
1
1
1 2
2
2-3
1
2
Rotor Grease Locations
Figure 38
Apply grease to the rotor groups (Item 1) and
spindle couplings (Item 2) [Figure 38].
Grease every 50 hours.
1
2