FS10 Series
Fluid Components International LLC 47
7 MAINTENANCE AND TROUBLESHOOTING
Maintenance
Perform preventive maintenance on the sensing element as required. If the process media sticks to the process pipes (or tank) clean the sens-
ing element in the same manner and frequency as the process pipe (or tank). Use solvent compatible with 316L stainless steel and Hastelloy
C22 (be careful not to bend or damage the thermowells). Occasionally check for moisture in the control circuit housing and wiring connec-
tions. Check for proper system functionality and response time.
Troubleshooting
If the instrument is not operating, go through the installation and adjustment procedures and verify proper installation. If the instrument
fails after some time in service and it has been checked, or if it fails to operate at start up and the installation has been verified, contact your
authorized FCI service representative.
If FCI representative cannot be reached, contact FCI Technical Service. If the instrument is to be returned, obtain a Return Authorization. The
form contains a declaration of decontamination cleaning information that the instrument must comply with before it is shipped to FCI. The
telephone number in the US is 1-800-854-1993 or 1-760-744-6950 or email: techsupport@fluidcomponents.com
To Next Page
Loading...
