FCI FS10A User Manual

Models FS10A, FS10i
Analyzer Flow Switch / Monitor
Fluid Components International LLC (FCI). All rights reserved.

FCI FS10A Specifications

General

Number of Ports	10
Port Type	10/100Base-TX
Speed	10/100 Mbps
MAC Address Table	1K
Power Supply	External

Summary

Installation & Operation Guide

Models FS10A, FS10i Analyzer Flow Switch / Monitor

Identifies the specific models covered in the guide.

TECHNICAL SPECIFICATIONS

Flow Sensitivity/Range

Agency Approvals

Lists certifications like FM, FMc, ATEX, IEC, and SIL compliance.

INSTRUMENT DESCRIPTION AND IDENTIFICATION

INSTRUMENT INSTALLATION

Special Conditions for Safe Use

Outlines safety requirements for installation in specific environments.

Remote Flow Element Installation Into Zone 1, Division 1 Areas

Mounting Orientation

INSTRUMENT WIRING

Recommended Minimum Wire Gauge

Grounding

Explains proper grounding procedures for safety and operation.

Input Power, 24 VDC

FS10 Outline Installation Drawing

POWER UP, FUNCTIONAL VERIFICATION AND ADJUSTMENT

SET-UP AND OPERATION

FS10 Function Overview

FS10 Field Quick Setup Procedure

Table 3 - Mode Operation Summary

Mode B: Capture Zero and Span + Set Default Switch Point

FS10 Button Controls — Alternate Setup Method

Normal Set-Up and Operation Using the Button Interface

Flow Switch Operation

Explains how to scale the unit for flow switch operation.

Minimum Flow Setting (Function 6)

Maximum Flow Setting (Function 7)

Switch Point Adjust (Function 1 or 2)

Explains methods for adjusting the switch point using buttons.

Additional Switch Settings

Fail-safe Position (Function 3)

Configures the relay state for normal and alarm conditions.

Hysteresis (Function 8 and 9)

Time Delay (Function 10 or 11)

Sets delays for relay activation or deactivation.

FS10 Recommended Point Level Interface Setup Procedure

PC Interface and Command Line Interface Configurations

FS10 Communication Options

Windows PC Interface Software

Using the K Factors Calculation Window

FS10 Serial Interface (Command Line, Alternate Communication Interface)

Command Line Interface Commands

Safety Instructions for the use of the FS10 flow meter in Hazardous Areas

SIL Declaration of Conformity

APPENDIX C CUSTOMER SERVICE

Customer Service/Technical Support

Outlines how to obtain technical support from FCI.

Decontamination Statement

WARRANTIES