Festo CMSH - Page 56

56
Festo — CMSH — 2021-10
Commissioning
Extension Modules
The ‘Extension Modules’ parameter defines the installed extension modules. This parameter enables
activation of an optimised control response for the extension module.
Value Description
NONE Factory setting
FLOW BOOSTER Volumetric flow amplifier
Tab. 69: Extension Modules
‘Display’ menu
Language
The ‘Language’ parameter defines the display language on the device.
Value Description
ENGLISH Factory setting
DEUTSCH —
Tab. 70: Language
Unit pressure
The ‘Unit pressure’ parameter defines the unit of pressure shown on the display.
Value Description
bar Factory setting
MPa —
psi —
Tab. 71: Unit pressure
Unit temperature
The ‘Unit temperature’ parameter defines the temperature unit shown on the display.
Value Description
CELSIUS Factory setting
FAHRENHEIT —
Tab. 72: Unit temperature
Display Orientation
The ‘Display Orientation’ parameter defines the display direction of the device. The display can be
adjusted in 90° steps.
Value Description
0° Factory setting
90° —