Festo CPX-FB36 - Page 8

Contents and general instructions
VI
Festo CPX-FB36-EN en 1611a English
C. EtherNet/IP Objects of the CPX-FB36 C-1..............................
C.1 Overview of Ethernet/IP objects C-3...................................
C.2 Objects for network settings C-8......................................
C.2.1 “Device Level Ring Object” C-8................................
C.2.2 “QoS Object” C-9...........................................
C.2.3 “TCP/IP Interface Object” C-10.................................
C.2.4 “Ethernet Link Object” C-12...................................
C.3 Objects for the I/O connection C-13....................................
C.3.1 “Assembly Object” C-13......................................
C.4 Objects for system data and diagnostics C-18............................
C.4.1 “Identity Object” C-18........................................
C.4.2 “Global System Object” for operating mode “Remote I/O” C-20......
C.4.3 “Status and Diagnosis Object” C-23.............................
C.4.4 “Diagnosis Trace Object” C-24.................................
C.4.5 “Diagnosis Trace Status Object” C-26...........................
C.4.6 “Generic Parameter Object” C-28...............................
C.4.7 “Force Parameter” C-31.......................................
C.4.8 “Fail safe” and “Idle” parameters C-36...........................
C.4.9 “Configuration Array Object” C-42..............................
C.4.10 “Slave Size Object” for “Remote Controller” operating mode C-42....
C.4.11 “ISDU Access Object” C-43....................................
C.5 Examples C-45......................................................
C.5.1 Forcing inputs C-45..........................................
C.5.2 Parameterisation with “Generic Parameter Object” C-47............