Programming
64 © Festo Didactic GmbH & Co. • MPS
Planning
Please plan your project step by step first within the group. Use the list of inputs and
outputs of the Project 1.3. Work out the informations of truth table, wiring diagram,
logic plan and stepping diagram first together with the Instructor. Before
programming, don´t forget to delete the contents of the PLC using the CPU-switch
again. Insert the application function FC5 to the Blocks, like described within the
Project 2.2 and edit the OB1 and the FC5. After editing, please download the Blocks
to the CPU and test the program.
The time to finish this project should be around 1,0 hour including theory.
Execution/Documentation
Program OB1:
To Next Page
Loading...
