Programming
76 © Festo Didactic GmbH & Co. • MPS
After a short actuation of a Start-button, the piston rod of the cylinder with single
solenoid shall move as long as a Reset- or a Stop-button is pressed shortly. The
program shall be activated by the Auto/Manu switch, the program FC8 is not running
if the Auto/Manu switch is off.
Information
Use the project before as a base and copy all parts from this project you need. Use
FC8 to edit the program. Open a new project and name it P2_07. Please use symbol
adresses. The programming language for FC8 is FBD, for OB1 STL.
Instructor: Explain how to rename a function (right mouse button à Rename).
Planning
Please plan your project step by step first within the team. Discuss the differences to
call a function (FC) with and without a condition. The command for conditional call is
CC. Before the action of CC, you have to edit a condition-which condition is this?
The time to finish this project should be around 1,0 hour.
2.7 Programming –
Condition Call of a
Program
To Next Page
Loading...
