Programming
© Festo Didactic GmbH & Co. • MPS 93
If a Start-button is pressed, the Start-light (H1) shall be on as long as the Start-
button is pressed. If you release the Start-button, the light will be on for another
3 seconds.
Information
Use FC1 to edit the programs. Please use symbol adresses. The programming
language for FC1 should be FBD, for OB1 STL. Use Timer 2 for this project.
Planning
Please plan your project step by step first within the team. Check out the function of
all timers and choose the right timer for your project. Edit on a sheet of paper first.
The time to finish this project should be around 1,0 hour.
2.10 Programming –
Off-Delay-Timer
function
To Next Page
Loading...
