EasyManua.ls Logo

Fiat SCUDO - Recommended ISOFIX Child Seats

Fiat SCUDO
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
117
Safety
5
This ISOFIX and i-Size mounting system
provides fast, reliable and safe tting of a child
seat inside the vehicle.
ISOFIX and i-Size child seats are tted with two
latches which are secured to the two front rings
A.
Some child seats also have an upper strap which
is attached to rear ring B.
To secure the child seat to the Top Tether:
remove and stow the head restraint before
installing a child seat on this seat (ret it once
the child seat has been removed),
pass the strap of the child seat over the top
of the seat backrest, centring it between the
openings for the head restraint rods,
attach the hook of the upper strap to rear ring
B,
tighten the upper strap.
Incorrect installation of a child seat in a
vehicle can compromise a child's safety
in the event of an accident.
Strictly follow the tting instructions provided
in the installation guide supplied with the child
seat.
For information on the various options for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
Recommended ISOFIX child
seats
Also consult the user guide from the child
seat’s manufacturer to nd out how to
install and remove the seat.
"RÖMER Baby-Safe and its ISOFIX base"
(size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
The base has a support leg, height-
adjustable, which rests on the vehicle's oor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Group 1: from 9 to 18 kg
Suitable for forward-facing installation only.
Attached to rings A and ring B, referred to as
TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining,
lying down.
This child seat can also be used in seat
positions not equipped with ISOFIX
mountings. In this case, it must be secured to
the vehicle's seat by the three-point seat belt.
Adjust the front seat of the vehicle so that the
child's feet do not touch the backrest.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 117 14/02/2022 15:33:30

Table of Contents

Related product manuals