69
Ease of use and comfort
3
► To connect a 12 V accessory (maximum
power: 120 Watts), lift the cover and plug in a
suitable adapter.
Observe the maximum power rating to
avoid damaging the accessory.
The connection of an electrical device
not approved by Fiat, such as a USB
charger, may adversely aect the operation of
vehicle electrical systems, causing faults such
as poor radio reception or interference with
displays in the screens.
USB socket
The socket can be used to connect a portable
device or a USB memory stick.
The socket reads audio les that are sent to your
audio system to be played through the vehicle's
speakers.
These les can be managed using the steering-
mounted controls or those on the audio system.
The USB socket also allows a
smartphone to be connected by
Android Auto
®
or CarPlay
®
, enabling certain
smartphone applications to be used on the touch
screen.
For best results, use a cable made or approved
by the device manufacturer.
These applications can be managed using the
steering-mounted controls or the audio system
controls.
When the USB socket is used, the
portable device charges automatically.
While charging, a message is displayed if the
power drawn by the portable device exceeds
the current supplied by the vehicle.
For more information about how to use this
equipment, refer to the sections describing
the audio and telematics systems.
220 V socket
Depending on version, a 220 V/50 Hz socket
(maximum power: 120 W) is located underneath
the front right-hand seat and therefore
accessible from row 2.
This socket works with the engine running, as
well as in STOP mode of Stop & Start.
► Lift the cover.
► Check that the indicator lamp is on green.
► Connect your multimedia or other electrical
device (telephone charger, laptop computer,
CD-DVD player, bottle warmer, etc.).
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 69 14/02/2022 15:33:17
To Next Page
Loading...
