87
Lighting and visibility
4
Lighting control stalk
Main lighting
Lamps o (ignition o)/
Daytime running lamps (engine running)
Automatic illumination of lamps/daytime
running lamps
Sidelamps only
Dipped or main beam headlamps
Headlamp dipping
► Pull the lighting control stalk to switch
between dipped and main beam headlamps.
In lamps o and sidelamps modes, pull the
lighting control stalk to switch the main beam
headlamps on directly ("headlamp ash").
Operation of the selected lighting is
conrmed by the illumination of the
corresponding indicator lamp.
Without AUTO lighting
With AUTO lighting
Foglamps
Rear foglamp
It only works if the sidelamps are on.
► Rotate the ring forwards/backwards to turn
it on/o.
When the lighting is switched o automatically
(with AUTO model), the foglamp and the dipped
beam headlamps will remain on.
Front foglamps/Rear foglamps
They operate with the sidelamps, dipped
or main beam headlamps on.
► Rotate the ring forwards:
• once to switch on the front foglamps,
• a second time to switch on the rear
foglamps.
► Turn in the opposite direction to switch o.
If the lighting is switched o automatically (with
AUTO model) or the dipped beam headlamps
are switched o manually, the foglamps and
sidelamps remain on.
► Rotate the ring backwards to switch the
foglamps o; the sidelamps will then switch o.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 87 14/02/2022 15:33:22
To Next Page
Loading...
