Fiat SCUDO - Rear Bench Seat

64
Ease of use and comfort
tip the seat forwards to place it in the vertical
position.
► Remove the seat through the side door for
row 2 or through the rear for row 3.
Changing the direction of
the seat
When the seat is removed, your can rotate it by
180°.
Retting
Before retting the seat in the vehicle,
pull the strap fully to ensure that the
latching mechanism has engaged.
Do not use the strap to lift the seat.
► Check that nothing is obstructing the rails.
► Fit the front part on the rails.
► Tip the seat to align the rear of the guides in
the rails.
► Slide the seat forwards or backwards until it
engages in the notches.
► Raise the backrest.
Check that the seat has correctly locked
on the oor when returned to the seating
position.
Fixed crew cab
The crew cab is made up of a xed bench seat,
seat belts, storage compartments (depending
on equipment) and side windows. It is separated
from the loading area by a high-strength
partition.
Rear bench seat
This ergonomic bench seat has three seats.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 64 14/02/2022 15:33:15