47
Ease of use and comfort
3
Correct driving position
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
– the height of the head restraint,
– the seat backrest angle,
– the seat cushion height,
– the longitudinal position of the seat,
– the height and reach of the steering wheel,
– the rear view mirror and door mirrors.
Once these adjustments have been
made, check the instrument panel can be
viewed correctly from your driving position.
Manually-adjusted front
seats
For more information on the Seat belts,
refer to the corresponding section.
Longitudinal
► Raise the control bar and slide the seat
forwards or backwards.
► Release the control bar to lock the seat in
position on one of the notches.
Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or
jamming the seat if large objects are placed
on the oor behind the seat.
Height
► Pull the control upwards to raise or push it
downwards to lower, until you obtain the position
required.
Backrest angle
► Depending on equipment, turn the knob
or pull the control all the way up and tilt the
backrest forwards or backwards to obtain the
desired angle.
Lumbar
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 47 14/02/2022 15:33:11
To Next Page
Loading...
