Fiat SCUDO - Individual Rear Seat(S) on Rails

62
Ease of use and comfort
Retting
Before retting the seat or bench seat in
the vehicle, pull the strap fully to ensure
that the latching mechanism has engaged.
Do not use the strap to lift the seat or
bench seat.
(example of an individual seat)
► Check that nothing is obstructing the rails.
► Place the front part of the guides on the rails.
► Tip the seat to align the rear of the guides in
the rails.
► Slide the seat forwards or backwards until it
engages in the notches.
► Raise the backrest.
Check that the seat has correctly locked
on the oor when returned to the seating
position.
Individual rear seat(s) on
rails
Shine, Business Lounge
The di󰀨erent equipment and settings described
hereafter vary according to the version and the
conguration of your vehicle.
The individual seat is tted with a three-point
inertia reel seat belt.
It can be placed facing forwards or facing
rearwards.
If there is an individual seat facing
rearwards in row 2, ensure that the seat
in row 1 (driver or passenger) is not set too
far back, in order to avoid contact between
the two seats.
This could cause signicant wear of the parts
which are in contact.
For more information on the Seat belts,
refer to the corresponding section.
Armrest(s)
The armrest has notches.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 62 14/02/2022 15:33:14