Fiat SCUDO - Page 63

61
Ease of use and comfort
3
► Release the control when the desired position
is reached.
Moving forward or backward
(example for an individual seat)
Two controls are provided for moving the seat
forward and backward:
► From the rear, pull the strap without going
beyond the point of resistance and push the seat
forward or pull it backward.
► From the front, raise the control and slide the
seat forward or backward.
Moving the seat along the
full length of the rail
► Slide the seat by pulling on the front control
or rear strap.
Folding the backrest to the
table position
(example for an individual seat)
► Put the head restraints in the low position.
► From the rear, lower the handle to release the
backrest.
► From the front, raise the handle to release
the backrest.
► Fold the backrest onto the cushion.
Do not leave objects (such as a bag or
toys) on the cushion when folding the
backrest.
Removing
(example of an individual seat)
► Move the seat forward for access to the
strap.
► Fold the backrest to the table position
► From the rear, pull the strap fully to release
the anchorages and tip the seat forwards to
place it in the vertical position.
► Remove the seat through the side door for
row 2 or through the rear for row 3.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 61 14/02/2022 15:33:14