EasyManua.ls Logo

Fiat SCUDO - Adjusting the Height; Brightness Adjustment; Memorising Speeds

Fiat SCUDO
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
152
Driving
C. If the vehicle is so equipped, inter-vehicle
distance information, automatic emergency
braking alerts and navigation instructions.
D. If the vehicle is so equipped, speed limit
information.
For more information about Navigation,
refer to the sections describing the audio
and telematics systems.
Selectors
1. On.
2. O󰀨 (long press).
3. Brightness adjustment.
4. Display height adjustment.
Activation/Deactivation
With the engine running, press button 1 to
activate the system and deploy the projection
blade.
Press and hold button 2 to deactivate the
system and retract the projection blade.
The state of the system is saved when the
engine is switched o󰀨 and restored on restarting.
Adjusting the height
With the engine running, adjust the display to
the desired height using the buttons 4:
up to move the display up,
down to move the display down.
Brightness adjustment
With the engine running, adjust the
brightness of the information display using the
buttons 3:
on the "sun" to increase the brightness,
on the "moon" to decrease the brightness.
When stationary or while driving, no
objects should be placed around the
projection blade (or in its recess) so as not to
impede its movement and correct operation.
In certain extreme weather conditions
(rain and/or snow, bright sunshine, etc.),
the head-up display may not be legible or
may su󰀨er temporary interference.
Some sunglasses may hamper reading of the
information.
To clean the projection blade, use a clean,
soft cloth (such as a spectacles cloth or
microbre cloth). Do not use a dry or abrasive
cloth, or detergent or solvent products, due to
the risk of scratching the projection blade or
damaging the non-reective coating.
This system operates when the engine is
running, and the settings are saved when
the ignition is switched o󰀨.
Memorising speeds
This function allows you to save speed
settings which are then used to set the two
systems: the speed limiter (limits the speed
of the vehicle) or cruise control (vehicle
cruising speed).
You can save 6 speed settings for each of the
two systems.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 152 14/02/2022 15:33:37

Table of Contents

Related product manuals