Fiat SCUDO - I-Size Child Seats

128
Safety
i-Size child seats
i-Size child seats have two latches that are anchored to the two rings A.
These i-Size child seats also have:
– either an upper strap that is attached to ring B.
– or a support leg that rests on the vehicle oor, compatible with the approved i-Size seat position.
Their role is to prevent the child seat from tipping forward in the event of a collision.
For more information on the ISOFIX mountings, refer to the corresponding section.
Locations for i-Size child seats
In accordance with the new European regulations, this table indicates the options for installing i-Size child seats on seats in the vehicle tted with i-Size
approved ISOFIX mountings.
Seat i-Size restraint system
Row 1 (a)
Passenger seat with passenger
airbag deactivated "OFF" or
activated "ON"
Not i-Size
Row 2
With 2-seat bench seat in row 1
Outer seats Not i-Size
Centre seat Not i-Size
With individual seats in row 1
Outer seats Not i-Size
Centre seat Not i-Size
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 128 14/02/2022 15:33:31