EasyManua.ls Logo

Fiat SCUDO - Unlocking;Complete or Selective Unlocking

Fiat SCUDO
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Access
2
Purchasing a second-hand vehicle
Have the key codes memorised by a Fiat
Dealership, to ensure that the keys in your
possession are the only ones able to start the
vehicle.
To preserve the battery charge in the
electronic key and the vehicle's battery,
the "hands-free" functions are set to
hibernation mode after 21 days without use.
To restore these functions, press one of the
remote control buttons or start the engine with
the electronic key in the reader.
For more information on starting with the
Keyless Entry and Start system, refer to the
corresponding section.
Electrical interference
The electronic key may not work if it is
close to an electronic device (e.g. mobile
telephone (switched on or on standby), laptop
computer, strong magnetic elds). If this
occurs, move the electronic key away from
the electronic device.
Accumulations (water, dust, grime, salt,
etc.) on the inner surface of the door
handle may a󰀨ect detection.
If cleaning the inner surface of the door
handle using a cloth does not restore
detection, contact a Fiat Dealership or a
qualied workshop.
A sudden splash of water (stream of water,
high pressure jet washer, etc.) may be
identied by the system as the desire to open
the vehicle.
Unlocking/Complete or
selective unlocking
What is the purpose of total
or selective unlocking?
Total unlocking unlocks all the vehicle’s doors
(front, side and rear).
Selective unlocking unlocks either the cab doors,
or the doors of the loading area (side and rear).
The separated unlocking system
between cab and loading area is a
security measure. This prevents access to the
part of the vehicle where the driver is not
present.
Activation/Deactivation
To activateselective unlocking
between the cab and the loading
area or to deactivate selective unlocking and
return to total unlocking mode, switch on the
ignition and press this button for more than two
seconds.
An audible signal and, depending on equipment,
a display message, conrm that the request has
been acknowledged.
Selective unlocking between cab and
loading area is activated by default.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 29 14/02/2022 15:33:06

Table of Contents

Related product manuals