Fiat SCUDO - Fixed Rear Seat and Bench Seat

58
Ease of use and comfort
Removing
► If the vehicle is so equipped, place the
backrest in the table position.
► Tip the bench seat.
► Release the front feet using the handles.
► Disengage the bench seat from its
anchorages.
► Remove the bench seat.
Retting
► Check that there is no object obstructing the
anchorages and preventing the feet locking into
place.
► Engage the front feet in the anchorages on
the oor (as shown above).
► Lock the front feet using the handles.
► Tip the bench seat backwards until the rear
feet lock into place.
Be careful of passengers' feet when
tipping.
► If the vehicle is so equipped, pull the control
and raise the backrest (from the rear, lower the
handle).
Check that the seat has correctly locked
on the oor when returned to the seating
position.
Fixed rear seat and bench
seat
Combi, Business
The di󰀨erent equipment and settings described
hereafter vary according to the version and the
conguration of your vehicle.
The seat has a backrest that may be xed or
foldable (table position).
The bench seat has a one-piece backrest that
may be xed or foldable (table position).
For more information on the Seat belts,
refer to the corresponding section.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 58 14/02/2022 15:33:14