PRINTING E100 PAGES 19
Printing E100 pages
The copier touch panel allows you to print special pages that are included in the system
software. These pages reside on the HDD. The following pages are available:
• Color Charts
• Configuration page—identifies options installed on the E100 and the current
configuration in Setup. Always print this page before you perform a service procedure so
that you can restore settings if necessary. If your reboot, wait 1-2 minutes before you print
this page.
After a network connection is established, the site administrator can customize options
according to network and user environment. Using this page as a guide can speed up this
process. For more information, see Configuration and Setup, which is part of the user
documentation set.
• E-mail Log
• Font List identifies fonts on the HDD, including the default fonts shipped with the E100
and any customer-installed fonts.
•FTP Log
•Job Log
• Test Page verifies that the E100 is functional and correctly connected to the copier.
To Next Page
Loading...