SYSTEM SOFTWARE 68
Restoring the system configuration
You can restore the configuration of the E100 to its previous state using a configuration file.
For more information about creating a configuration file, see “Backing up the system
configuration” on page 67.
NOTE: If you were unable to create a configuration file, you must configure Setup. After you
exit Setup and the E100 reboots, ask the network administrator to restore any archived
settings and files that were saved. For information about Setup, see Configuration and Setup,
which is part of the user documentation set.
TO RESTORE THE SYSTEM CONFIGURATION
1. Right-click FieryBar, and choose WebTools from the Shortcut menu.
2. In WebTools, click Configure > Launch Configure.
The Login dialog box appears.
3. Enter the Administrator password, and then click OK.
The default Administrator password is Fiery.1 (case-sensitive), but the network administrator
may have changed the password.
4. Click Server > Backup/Restore, and then click the Restore Fiery Settings button.
5. In the Open dialog box, browse to the configuration file that you created earlier, and click
Open.
To Next Page
Loading...