FIOCCHETTI 130 - Page 50

MNL004_EN rev. F
Pag. 50 di 56
VISUAL AND ACOUSTIC ALARM
SOLUTION
HIGH CONDENS
• Switch off the refrigerator from the keyboard -STAND BY (see par.
5.2.3.1). Then, disconnect the electrical plug, wait a few seconds and
then re-connect the plug. Switch the refrigerator back on from the
keyboard and, once the temperature is displayed, press "OK" so that
the acoustic and visual alarms disappear.
•
• Air condition the environment.
• Check that installation has been properly performed (see par. 4.2)
• Clean the condenser (see par. 6.3)
• If the problem persists, contact Technical Support.