EasyManua.ls Logo

FläktGroup Multi-DENCO - Page 54

FläktGroup Multi-DENCO
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Multi-DENCO
54 FläktGroup DC-2013-0101-GB • Subject to modifications • R5-08/2020
Fig. 5-24
For the Hybrid Unit DMOUHM:
For placing the unit on the installation place, use a crane and un-stretchable slings,
spreader bars or any other equivalent device for holding the unit and make sure to
connect it properly (Fig. 5-25).
Slings must be on the same distance from the center of gravity label which is on the
packing box.
While lifting, all people except those who lift/move the unit must be away from the
unit.
Lift the unit carefully and lie it down on a platform, table or any other rigid instrument
on the site and start installing the legs vertically/horizontally as required.
NOTE!
Table height must be more than 600 mm if the vertical position is required.
Note!
The minimum table height for DMOUHM units in the vertical position is 1000 mm.

Table of Contents

Related product manuals