9 Measurement
FLUXUS G801 9.2 Measurement settings
91
UMFLUXUS_G801V1-0EN, 2020-06-26
Tab. 9.1: Configuration of the outputs
source item list item output
Measuring value actual measure physical quantity selected in the program branch Output Options
Flow flow, independent of the physical quantity selected in the program branch
Output Options
Quantity Q+ totalizer for positive flow direction
* actual measure totalizer for the physical quantity selected in the program branch
Output Options
* Flow flow totalizer
Q– totalizer for negative flow direction
* actual measure totalizer for the physical quantity selected in the program branch
Output Options
* Flow flow totalizer
ΣQ sum of the totalizers (positive and negative flow direction)
* actual measure totalizer for the physical quantity selected in the program branch Output
Options
* Flow flow totalizer
Limit R1 limit message (Alarm Output R1)
R2 limit message (Alarm Output R2)
R3 limit message (Alarm Output R3)
Impuls from abs(x) pulse without sign consideration
from x > 0 pulse for positive measured values
from x < 0 pulse for negative measured values
Miscellaneous c-Medium sound speed of the fluid
SCNR ratio of useful signal and correlated noise signal
Signal signal amplitude of a measuring channel
VariAmp standard deviation of the signal amplitude
Density fluid density
Pressure fluid pressure
To Next Page
Loading...
