F R O N T C O N S O L E C H A P T E R 3
(7) Filter Controls
Figure 38: Filter Controls
The filter controls consist of ten customizable, mode-specific, labeled filter buttons and two variable
filter buttons.
Labeled Filter Buttons
Clicking on any of the labeled buttons in the top half of the filter controls section sets the filter
bandwidth. The available filters depend on the selected modulation mode. The 3 groups of default filter
selections for CW (CWL, CWU), SSB (LSB, USB, DIGL, DIGU) and DSB (DSB, FMN, AM, SAM) are
shown below. The SPEC mode has no filters associated with it and the DRM filter is fixed at 12kHz.
CW Default Filters SSB Default Filters DSB Default Filters
Figure 39: Default Mode Dependent Filters
Each of the 10 labeled filter buttons can be customized for any of the modes. To do so, right click on a
filter button and select Configure… to bring up the screen shown in Figure 40.
[The rest of this page has been left blank intentionally]
42 2003-2009 FlexRadio Systems
To Next Page
Loading...
